|
|
|
National Stock Number:
5310-01-004-7214
Federal Supply Class:
5310
National Item Identification Number:
010047214
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 140-007-41-38C5 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| BOTTOM RECESS ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM | | BOTTOM RECESS DIAMETER | 0.711 INCHES MINIMUM AND 0.721 INCHES MAXIMUM | | HOLE DIAMETER | 0.631 INCHES MINIMUM AND 0.651 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | SURFACE FINISH | 63.0 MICROINCHES ALL SURFACES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TOP RECESS ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM | | TOP RECESS DIAMETER | 0.711 INCHES MINIMUM AND 0.721 INCHES MAXIMUM |
|
|