5935-00-996-1837 CONNECTOR BODY,RECEPTACLE,ELECTR Index 5360-00-996-1839 SPRING,HELICAL,COMPRESSION

National Stock Number:
5310-00-996-1838

Federal Supply Class:
5310

National Item Identification Number:
009961838

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
20050428528ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
20050431550L3HARRIS TECHNOLOGIES, INC.
3-7DIN125NRSTD8385THALES DEUTSCHLAND GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.112 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
OVERALL DIAMETER0.279 INCHES MINIMUM AND 0.299 INCHES MAXIMUM
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM


Click here to Register for Free 30-day Trial