5925-00-995-8373 CIRCUIT BREAKER Index 5935-00-995-8388 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5310-00-995-8377

Federal Supply Class:
5310

National Item Identification Number:
009958377

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
66-17692-181205THE BOEING COMPANY


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.378 INCHES MINIMUM AND 0.388 INCHES MAXIMUM
OVERALL DIAMETER0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION-AMS 4640 ASSN STD 1ST MATERIAL RESPONSE OR -MIL-B-6946 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 630 OR COPPER ALLOY OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.057 INCHES MINIMUM AND 0.062 INCHES MAXIMUM


Click here to Register for Free 30-day Trial