|
|
National Stock Number: 5310-00-995-2722
Federal Supply Class: 5310
National Item Identification Number: 009952722
Description: WASHER,FLAT
Detail: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
4592486 ITEM 17 | 12934 | NAVAL AIR WARFARE CENTER WEAPONS DIV | 5310003662982 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | 590GB 1127 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | 8029142 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | MS16212-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
CENTER HOLE SHAPE STYLE | ROUND | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | HOLE DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-591 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | COPPER ALLOY 651 OVERALL | MINIMUM TENSILE STRENGTH | 50000 POUNDS PER SQUARE INCH | PERIPHERAL SHAPE STYLE | ROUND | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
|
|