|
|
|
National Stock Number:
5310-00-994-9767
Federal Supply Class:
5310
National Item Identification Number:
009949767
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| A1-4946 | 31949 | BROOKS AUTOMATION, INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | HARDNESS RATING | 62.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.705 INCHES MINIMUM AND 0.713 INCHES MAXIMUM | | OVERALL DIAMETER | 1.097 INCHES MINIMUM AND 1.102 INCHES MAXIMUM | | SPECIAL FEATURES | 0.016 TO 0.024 IN. BY 45 DEG CHAMGER ON ONE BEARING SURFACE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.118 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
|
|