5340-00-994-1654 TURNBUCKLE Index 5310-00-994-1656 WASHER,FLAT

National Stock Number:
5310-00-994-1655

Federal Supply Class:
5310

National Item Identification Number:
009941655

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
CVC754-356C2880378TRIUMPH AEROSTRUCTURES, LLC


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.438 INCHES NOMINAL
OVERALL DIAMETER0.875 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.045 INCHES NOMINAL


Click here to Register for Free 30-day Trial