5330-00-990-0005 GASKET Index 3110-00-990-0008 BEARING,BALL,ANNULAR

National Stock Number:
5310-00-990-0006

Federal Supply Class:
5310

National Item Identification Number:
009900006

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
2-080-154-0199193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
OVERALL DIAMETER0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM


Click here to Register for Free 30-day Trial