|
|
|
National Stock Number:
5310-00-974-6642
Federal Supply Class:
5310
National Item Identification Number:
009746642
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 004-003005-029 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 10121903 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 35808-4ITEM160 | 95402 | ELECTRIC BOAT CORP DBA ELECTRO DYNAMIC | | 50P00182-0146 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | D301088 FIND NO 85 | 3X894 | CONTROL FLOW, INC. | | D305308 FIND NO 115 | 3X894 | CONTROL FLOW, INC. | | D320448 FIND 109 | 3X894 | CONTROL FLOW, INC. | | E101286 PC NO 66 | 3X894 | CONTROL FLOW, INC. | | E102170 PC NO 66 | 3X894 | CONTROL FLOW, INC. | | E103972 FIND 66 | 3X894 | CONTROL FLOW, INC. | | E104459 FIND 66 | 3X894 | CONTROL FLOW, INC. | | E108609 FIND 129 | 3X894 | CONTROL FLOW, INC. | | FF-W-84 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35338-148 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35338-148 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35338-91 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | WG105388 | 3X894 | CONTROL FLOW, INC. | | WG105388 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | WG107388 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 1.042 INCHES MINIMUM AND 1.071 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.661 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL THICKNESS | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|