|
|
|
National Stock Number:
5310-00-935-4301
Federal Supply Class:
5310
National Item Identification Number:
009354301
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8154-180C020 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | OVERALL DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | -MIL-S-5049 COMP 301 MIL SPEC SINGLE MATERIAL RESPONSE OR -MIL-S-5049 COMP 302 COND 2B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIFICATION/STANDARD DATA | 70210-S8154 MANUFACTURERS STANDARD | | THICKNESS | 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
|
|