|
|
|
National Stock Number:
5310-00-841-5630
Federal Supply Class:
5310
National Item Identification Number:
008415630
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 219A542 | 23233 | JAY-EM AEROSPACE CORPORATION | | 219A542 | 73808 | CONTINENTAL TIRE THE AMERICAS, LLC |
|
Techincal Specification:
| HOLE DIAMETER | 0.315 INCHES MINIMUM AND 0.324 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.709 INCHES MINIMUM AND 0.729 INCHES MAXIMUM | | OVERALL HEIGHT | 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4130 ASSN STD 1ST MATERIAL RESPONSE OR AISI 1330 ASSN STD 2ND MATERIAL RESPONSE OR AISI3130 ASSN STD 3RD MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.078 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | RECESS DIAMETER | 0.396 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DEPTH | 0.031 INCHES NOMINAL | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|