|
|
|
National Stock Number:
5310-00-840-5785
Federal Supply Class:
5310
National Item Identification Number:
008405785
Description:
NUT,PLAIN,HEXAGON
Detail:
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 001340 | 75078 | JACOBS MFG CO THE | | 10121756 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 13207E3409FN90 | 97403 | CECOM LR CENTER | | 536-0047-02 | K6608 | ANDREW LTD | | 536-0047-02 | U7810 | ANDREW LTD | | 5JC54 | 45152 | OSHKOSH CORP | | 5JC54 | 75Q65 | OSHKOSH DEFENSE LLC | | FF-N-836 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35691-430 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS35691-7 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,TYPE 302,OR 303,OR 304,OR 305,OR 316,OR 317,OR 347 FED STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 317 OR STEEL COMP 347 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 5 STYLE AND A CONDITION | | NUT HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM | | NUT STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2B | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES | UNF |
|
|