|
|
|
National Stock Number:
5310-00-812-2933
Federal Supply Class:
5310
National Item Identification Number:
008122933
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 10163440 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 378019 | 11757 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE WIDTH ACROSS FLATS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | FLANGE THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | NUT DIAMETER | 0.435 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | | NUT LENGTH | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM | | NUT STYLE | SLEEVE | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108,COMPOSITION C1010-C1020,COLD FINISH MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SPECIAL FEATURES | ONE 0.100 IN. DIA. HOLE DRILLED THROUGH ONE SIDE OF PILOT 0.156 IN FROM END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT THREADS | | SURFACE TREATMENT | CADMIUM OVERALL EXCEPT THREADS | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 20 |
|
|