5305-00-811-3977 SCREW,MACHINE Index 5910-00-811-3985 CAPACITOR,FIXED,GLASS DIELECTRIC

National Stock Number:
5310-00-811-3981

Federal Supply Class:
5310

National Item Identification Number:
008113981

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
7874555P1110543CANADIAN GENERAL ELECTRIC CO LTD
7874555P1124446GENERAL ELECTRIC COMPANY
787455P1194271LOCKHEED MARTIN CORP


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
OVERALL DIAMETER0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-D-1170 T1 GRADE P-1141-A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALASBESTOS OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.035 INCHES NOMINAL


Click here to Register for Free 30-day Trial