5325-00-810-9625 RECEPTACLE,TURNLOCK FASTENER Index 5306-00-810-9629 BOLT,EYE

National Stock Number:
5310-00-810-9627

Federal Supply Class:
5310

National Item Identification Number:
008109627

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
546-3022-00313499ROCKWELL COLLINS, INC.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.376 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
OVERALL DIAMETER0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 304 OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.027 INCHES MINIMUM AND 0.035 INCHES MAXIMUM


Click here to Register for Free 30-day Trial