5910-00-810-7195 CAPACITOR,FIXED,PAPER DIELECTRIC Index 5310-00-810-7199 WASHER,FLAT

National Stock Number:
5310-00-810-7197

Federal Supply Class:
5310

National Item Identification Number:
008107197

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
MS15795-31080205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-31096906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
DEPARTURE FROM CITED DESIGNATORPART NO. MS15795-310,AS MODIFIED BY REPLY TO SPECIAL FEATURES
HOLE DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
OVERALL DIAMETER0.625 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIAL FEATURESSPECIALLYSELECTED FOR FBM APPLICATION PER OP 2747
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM


Click here to Register for Free 30-day Trial