3419-00-809-8545 KEYSEATING MACHINE,RECIPROCATING Index 5905-00-809-8549 RESISTOR,FIXED,FILM

National Stock Number:
5310-00-809-8546

Federal Supply Class:
5310

National Item Identification Number:
008098546

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10121721A486GNIMIKKEISTOKESKUS NCB FINLAND
1018985-00805037ANACOMP, INC.
1018985-0080HBH2LEXEL IMAGING SYSTEMS INC
12569611-819207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
12Z3035-3694135NAVAL ORDNANCE STANDARDS
3536105463WHEELABRATOR-FRYE INC BALCRANK PRODUCTS
4197500-03205869RAYTHEON COMPANY
4197500-03282577RAYTHEON COMPANY
4197515-00705869RAYTHEON COMPANY
44616021450ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
4B4274D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
5300696046CRANE PUMPS & SYSTEMS PFT CORP
5310008098546A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5310008098546SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5310PL07211949009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
88-368-30-13079092REED INDUSTRIES INC VICTOR PRODUCTS DIV
A10643U4574FNH UK LTD
A20489U4574FNH UK LTD
B4525-307-2360532TRANE U.S. INC.
D301079 FIND N0 433X894CONTROL FLOW, INC.
D301079 FIND NO 433X894CONTROL FLOW, INC.
D301080 FIND N0 393X894CONTROL FLOW, INC.
D301080 FIND NO 393X894CONTROL FLOW, INC.
D301087 FIND N0 433X894CONTROL FLOW, INC.
D301087 FIND NO 433X894CONTROL FLOW, INC.
LS10911391-801417GENERAL DYNAMICS LAND SYSTEMS INC.
LS109139101417GENERAL DYNAMICS LAND SYSTEMS INC.
MS 27183-8D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS15795-10880205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-10896906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-20880205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-20896906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-880205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-896906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15975-208D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS27183-08D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS27183-896906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
STR0NGH0LDWASHER-874323STRONGHOLD SCREW PRODUCTS
TIP0002197403CECOM LR CENTER
X25-4955469ESSEX INDUSTRIES, INC.
XX002-0529H2229RDM TECHNOLOGY B.V.


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.214 INCHES MINIMUM AND 0.227 INCHES MAXIMUM
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND A CLASS
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us