5905-00-809-4084 RESISTOR,FIXED,FILM Index 3040-00-809-4087 GEARSHAFT,SPUR

National Stock Number:
5310-00-809-4085

Federal Supply Class:
5310

National Item Identification Number:
008094085

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
0724989S3002GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH
10082608A486GNIMIKKEISTOKESKUS NCB FINLAND
103342D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
12039511862GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
12039524617GENERAL MOTORS CORP
120395D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
1402129311862GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
1512904627HYSTER-YALE GROUP, INC.
1512930076HYSTER-YALE GROUP, INC.
243616411862GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
303860H0G87WIBA ZEVENAAR B.V.
3631V00827315MORRIS MATERIAL HANDLING, INC.
526-151844940CUMMINS POWER GENERATION INC.
5310008094085SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5310PL07051859009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
6300782-1653711NAVAL SEA SYSTEMS COMMAND
70026-1695097LITTLE GIANT CRANE AND SHOVEL INC
942002224617GENERAL MOTORS CORP
C4524-380-760532TRANE U.S. INC.
FF-W-9281348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS27183-1696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.464 INCHES MINIMUM AND 0.484 INCHES MAXIMUM
OVERALL DIAMETER0.915 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND A CLASS
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THICKNESS0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM


Click here to Register for Free 30-day Trial