5999-00-809-4056 CONTACT,ELECTRICAL Index 5360-00-809-4059 SPRING,HELICAL,COMPRESSION

National Stock Number:
5310-00-809-4058

Federal Supply Class:
5310

National Item Identification Number:
008094058

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
0708071S3002GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH
10082606A486GNIMIKKEISTOKESKUS NCB FINLAND
101898505037ANACOMP, INC.
1018985-00105037ANACOMP, INC.
1018985-0010HBH2LEXEL IMAGING SYSTEMS INC
1018985D00105037ANACOMP, INC.
103339D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
108202-1521714KECO INDUSTRIES INC AEROSPACE GROUND EQUIPMENT DIV
12-Z-22-271D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
12039211862GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
120392D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
12569611-1019207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
12Z3035-3794135NAVAL ORDNANCE STANDARDS
13207E8525FN497403CECOM LR CENTER
18L4280-1716662LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE
18L4280-1766654TVH PARTS CO.
1C6360P1407482GENERAL ELECTRIC COMPANY
25-000065-01163123FARRIS M & ASSOCIATES
3776696046CRANE PUMPS & SYSTEMS PFT CORP
4B4276D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
5310-00061796CEMEN TECH, INC.
5310008094058SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5310PL01503979009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310PL07277039009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
6640211 FIND 3353711NAVAL SEA SYSTEMS COMMAND
6787258464SHELLER-GLOBE CORP SUPERIOR-LIMA DIV
70026-1095097LITTLE GIANT CRANE AND SHOVEL INC
703HX45152OSHKOSH CORP
703HXSCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
703HX145152OSHKOSH CORP
703HX175Q65OSHKOSH DEFENSE LLC
75ELS2400736FALLS FILTRATION TECHNOLOGIES, INC.
0161200765N978THERMA-TECH ENGINEERING INC
75ELS24R1120SATAIR A/S
810001315434CUMMINS INC.
8130982682796COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE DIV FAIRBANKS MORSE ENGINE
820650G55AE58474SUPERIOR ELECTRIC HOLDING GROUP LLC
88-2056430554DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER
88-20564-230554DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER
941927417769L AND S INDUSTRIES INC
941927424617GENERAL MOTORS CORP
941989211862GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
A22506-489326BARKSDALE INC
A60901453964KAYDON CUSTOM FILTRATION CORPORATION
AU02AA17110855CARRIER CORP
AU02AA17119422DEMARKUS CORP REFRIGERATION ENGINEERING CORP
C12-2293788907BRUNSWICK CORP
C4524-380-460532TRANE U.S. INC.
G941927434623AM GENERAL LLC
L4280-1746717PETTIBONE LLC
LS109139101417GENERAL DYNAMICS LAND SYSTEMS INC.
LS1091391-1001417GENERAL DYNAMICS LAND SYSTEMS INC.
LS1785-416D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS15795-21096906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27183-1096906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27183-10A0311TECNO TRADE S.R.L.
MS27183-10A9271GORIZIANE GROUP SPA
MS27183-10AC910AERTEKNO S.R.L.
MS27183-10D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS28173-10D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
NAS1070-41698897LOCKHEED MARTIN CORP
NAS1070-416LD9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
PL 14811020 ITEM 15695310UNIDYNAMICS/SAINT LOUIS INC CONROE OPNS
PL14811020 ITEM 1560DHG4GULF COAST HOLDINGS INC DBA UNIDYNAMICS
SK-11001-50EAK3GSE MANAGEMENT CO
SP2511910001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
VS1-405186ANDERS & SONS INC.
WG1053473X894CONTROL FLOW, INC.
FR9370DF7463SOC CONSTRUC MACHINES OUTILS BLISS


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CRITICALITY CODE JUSTIFICATIONFEAT
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.276 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
OVERALL DIAMETER0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND A CLASS
PERIPHERAL SHAPE STYLEROUND
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THICKNESS0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us