|
|
|
National Stock Number:
5310-00-807-0567
Federal Supply Class:
5310
National Item Identification Number:
008070567
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 05-374079 | 31435 | LUCAS AEROSPACE POWER EQUIPMENT CORPORATION | | 05-374079 | 3CPE0 | SAFRAN POWER USA LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 108.0 ROCKWELL M MINIMUM AND 126.0 ROCKWELL M MAXIMUM | | HOLE DIAMETER | 0.143 INCHES NOMINAL | | OVERALL DIAMETER | 0.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15037 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC MELAMINE OVERALL | | MINIMUM TENSILE STRENGTH | 26100 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.0545 INCHES MINIMUM AND 0.0695 INCHES MAXIMUM |
|
|