|
|
|
National Stock Number:
5310-00-802-1988
Federal Supply Class:
5310
National Item Identification Number:
008021988
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1754570-4 | 07187 | HONEYWELL INTERNATIONAL INC. | | 22 021-006 | D9853 | ROCKWELL COLLINS DEUTSCHLAND GMBH | | 404-7277 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5030-1004 | 12444 | DESIGNATRONICS INC PERFECT GEAR AND INSTRUMENT DIV | | 671-451-9004 | 12444 | DESIGNATRONICS INC PERFECT GEAR AND INSTRUMENT DIV | | 910229-04 | 90536 | LOCKHEED MARTIN CORP | | B4-4 | 00141 | ROLLER BEARING CO OF AMERICA, INC | | CSPP1-8-4 | 70318 | ALLMETAL SCREW PRODUCTS CORP | | G68 | 00328 | DESIGNATRONICS INCORPORATED | | G68-4 | 00328 | DESIGNATRONICS INCORPORATED | | SA1176-4 | 10639 | AVIONICS SPECIALTIES INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OVERALL DIAMETER | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.008 INCHES MINIMUM AND 0.012 INCHES MAXIMUM |
|
|