|
|
|
National Stock Number:
5310-00-796-9445
Federal Supply Class:
5310
National Item Identification Number:
007969445
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3-11804-1 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 3-11804-1 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.880 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | LENGTH | 1.460 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 17-4PH,COND H1000 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | PERIPHERAL SHAPE STYLE | RECTANGULAR | | SPECIAL FEATURES | DSHAPED CROSS SECTION,THICKNESS IS 0.300,COUNTERSINK 45 DEGREE ANGLE ON FLAT SIDE | | WIDTH ACROSS FLATS | 1.440 INCHES NOMINAL |
|
|