|
|
|
National Stock Number:
5310-00-785-3961
Federal Supply Class:
5310
National Item Identification Number:
007853961
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1DD331 | 45152 | OSHKOSH CORP | | 1DD331 | 75Q65 | OSHKOSH DEFENSE LLC | | 5125108 | 24617 | GENERAL MOTORS CORP | | 5125108 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5125108 | 7X677 | GENERAL MOTORS LLC | | 5125108 | 97907 | TEREX CORP | | K-5125108 | 18954 | KORODY-COLYER CORP A CR INDUSTRIES CO | | PC5125108 | C7432 | POWER COMPONENTS (DEUTSCHLAND) GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 65.0 ROCKWELL B MAXIMUM | | HOLE DIAMETER | 0.440 INCHES MINIMUM AND 0.446 INCHES MAXIMUM | | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE TEMPER T4 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1008 OR STEEL COMP 1020 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
|
|