|
|
|
National Stock Number:
5310-00-782-8369
Federal Supply Class:
5310
National Item Identification Number:
007828369
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121699 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 153-0183-007 | 94756 | THE BOEING COMPANY | | 249443 | 07187 | HONEYWELL INTERNATIONAL INC. | | 249443 | 56232 | LOCKHEED MARTIN CORPORATION | | 310-0740-280 | 13499 | ROCKWELL COLLINS, INC. | | 5310PL0730449 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 706568-38 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | 732032-132 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | 732032-132 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 732032-132 | 99207 | GENERAL ELECTRIC COMPANY | | B69510 | K0967 | MBDA UK LTD | | NAS620C5L | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | S8154-244C020 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CRITICALITY CODE JUSTIFICATION | ZZZK | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.138 INCHES MAXIMUM | | OVERALL DIAMETER | 0.231 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIFICATION/STANDARD DATA | 70210-S8154 MANUFACTURERS STANDARD | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.016 INCHES NOMINAL |
|
|