|
|
|
National Stock Number:
5310-00-776-7668
Federal Supply Class:
5310
National Item Identification Number:
007767668
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 5310007767668 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310007767668 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 6760593 | 24617 | GENERAL MOTORS CORP | | 7767668 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.312 INCHES NOMINAL | | DRIVE POINT QUANTITY | 6 | | DRIVE POINT WIDTH | 0.250 INCHES NOMINAL | | COUNTERSINK ANGLE | 119.0 DEGREES MINIMUM AND 121.0 DEGREES MAXIMUM FIRST END | | COUNTERSINK ANGLE | 119.0 DEGREES MINIMUM AND 121.0 DEGREES MAXIMUM SECOND END | | COUNTERBORE DIAMETER | 4.000 INCHES NOMINAL NUT | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-626 FED SPEC SINGLE MATERIAL RESPONSE OR SAE FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL | | NOMINAL THREAD SIZE | 3.891 INCHES | | NUT DIAMETER | 5.240 INCHES MINIMUM AND 5.260 INCHES MAXIMUM | | NUT COUNTERBORE DEPTH | 0.125 INCHES NOMINAL NUT | | NUT STYLE | ROUND | | NUT THICKNESS | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | SPECIAL FEATURES | 3.830 IN. MIN 3.836 IN. MAX DIA COUNTERSTNK ON SMALL END AND 4.719 IN. DIA COUNTERSINK ON LARGE END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TYPE M,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNS | | THREAD PITCH DIAMETERS | +3.8575 TO 3.8631 INCHES | | THREAD QUANTITY PER INCH | 20 |
|
|