4320-00-773-7617 IMPELLER,PUMP,CENTRIFUGAL Index 5330-00-773-7619 PAD

National Stock Number:
5310-00-773-7618

Federal Supply Class:
5310

National Item Identification Number:
007737618

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10121668A486GNIMIKKEISTOKESKUS NCB FINLAND
130-10414GNV9BMI DEFENSE SYSTEMS, INC
1C6167P2207482GENERAL ELECTRIC COMPANY
1C6171P09D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
1C6175P2307482GENERAL ELECTRIC COMPANY
1C6368P0907482GENERAL ELECTRIC COMPANY
200609H02628528ITT INDUSTRIES INC ITT AEROSPACE COMMUNICATIONS DIV EAST
236-1149P2349956RAYTHEON COMPANY
245-4510945-5551563ROHR, INC.
411027-81496214RAYTHEON COMPANY
4197500-12496214RAYTHEON COMPANY
4912548-0690536LOCKHEED MARTIN CORP
49791-32X12PC496169ELECTRIC BOAT CORPORATION
501-7298327 ITEM N0 3053711NAVAL SEA SYSTEMS COMMAND
501-7298327 ITEM NO 3053711NAVAL SEA SYSTEMS COMMAND
501-7368087 ITEM N0 1153711NAVAL SEA SYSTEMS COMMAND
501-7368087 ITEM NO 1153711NAVAL SEA SYSTEMS COMMAND
501-7368091 ITEM N0 1653711NAVAL SEA SYSTEMS COMMAND
501-7368091 ITEM NO 1653711NAVAL SEA SYSTEMS COMMAND
501-7368092 ITEM N0 1453711NAVAL SEA SYSTEMS COMMAND
501-7368092 ITEM NO 1453711NAVAL SEA SYSTEMS COMMAND
50453U4494EKA LIMITED
5310007737618A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5310007737618SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
6367615-9896214RAYTHEON COMPANY
695-7702-25D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
695-7703-25D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
695-7703PC2509647AQUA-CHEM INC.
6961905 FIND 653711NAVAL SEA SYSTEMS COMMAND
82-1029-81414936GENERAL SEMICONDUCTOR INC
8924401-11049671LOCKHEED MARTIN CORP LOCKHEED MARTIN INFORMATION SYSTEMS AUTOMATED SPARES
925000-081465597THALES USA, INC.
9428M65P2307482GENERAL ELECTRIC COMPANY
946008-814006481NORTHROP GRUMMAN SYSTEMS CORPORATION
952-07612-000D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
952-761209647AQUA-CHEM INC.
98019A19939428MCMASTER-CARR SUPPLY CO
98019A3990KVE6MCMASTER-CARR SUPPLY CO
98019A39939428MCMASTER-CARR SUPPLY CO
A3210097-580063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
ASC1536310Z4779ASC PTY LTD
FF-W-9281348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS 15795-814D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS15795-8146R888J. T. D. STAMPING CO INC
MS15795-81480205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-81496906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-814A9271GORIZIANE GROUP SPA
MS15795-814AF918INTEC SRL A SOCIO UNICO
MS15795-814K5974ROLLS-ROYCE PLC NAVAL MARINE
NASM15795-81480205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
SS-845-2050999 PC 2280064NAVAL SHIP SYSTEMS COMMAND


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.401 INCHES MINIMUM AND 0.421 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OVERALL
PERIPHERAL SHAPE STYLEROUND
PROPRIETARY CHARACTERISTICSNPAC
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND B CLASS
OVERALL DIAMETER0.805 INCHES MINIMUM AND 0.827 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THICKNESS0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us