|
|
|
National Stock Number:
5310-00-771-6827
Federal Supply Class:
5310
National Item Identification Number:
007716827
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0S080011 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 0S080011 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 10121662 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5310PL1737443 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AN960PD10L | 4R840 | STAMCO AEROSPACE, INC. | | AN960PD10L | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | NAS1197-10L | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | DEPARTURE FROM CITED DESIGNATOR | PART NO. AN960PD10L AS MODIFIEDBY REPLY TO SPECIAL FEATURES | | HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL DIAMETER | 0.438 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-362,T3 FED SPEC 1ST MATERIAL RESPONSE AND QQ-A-362,T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | REQUIRESENVIRONMENTAL TEST IN ACCORDANCE W/SPECIAL PROJECTSFLEET BALLISTIC MISSILE PLAN OP 2747 | | SURFACE TREATMENT | ANODIZE OVERALL | | THICKNESS | 0.016 INCHES NOMINAL |
|
|