|
|
|
National Stock Number:
5310-00-769-0159
Federal Supply Class:
5310
National Item Identification Number:
007690159
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 8060000519 | 57057 | NAVCOM DEFENSE ELECTRONICS, INC. |
|
Techincal Specification:
| NUT STYLE | SLEEVE | | BOSS THICKNESS | 0.094 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,TEMPER 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | THREAD CLASS | 2B | | NOMINAL THREAD SIZE | 0.750 INCHES | | NUT LENGTH | 0.125 INCHES NOMINAL | | THREAD SERIES | UNEF | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290,CL 1,TY 6 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | SURFACE TREATMENT | NICKEL OVERALL | | NUT WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL | | BOSS DIAMETER | 0.865 INCHES MINIMUM AND 0.870 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY 260 OVERALL |
|
|