|
|
|
National Stock Number:
5310-00-766-2484
Federal Supply Class:
5310
National Item Identification Number:
007662484
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| MS35333-114 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35333-114 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HEAT TREATMENT | HOT ROLLED OR HARD DRAWN | | HOLE DIAMETER | 0.576 INCHES MINIMUM AND 0.596 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.957 INCHES MINIMUM AND 0.985 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-750,COMP A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY OVERALL | | MINIMUM TENSILE STRENGTH | 85000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | FLAT INTERNAL TEETH |
|