|
|
|
National Stock Number:
5310-00-765-3197
Federal Supply Class:
5310
National Item Identification Number:
007653197
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 00-4146 | 53655 | AVOX SYSTEMS INC | | 0740723 | S3002 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH | | 10385718 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 195-10 | 10988 | CNH INDUSTRIAL AMERICA LLC | | 526-1707 | 44940 | CUMMINS POWER GENERATION INC. | | 5310007653197 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5310PL0776580 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5310PL1390484 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 70026-41 | 95097 | LITTLE GIANT CRANE AND SHOVEL INC | | 82-1013-004 | 04664 | PIERCE MANUFACTURING INC | | 820-4551187-6 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | FFW92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS27183-41 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.183 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | OVERALL DIAMETER | 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND A CLASS | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THICKNESS | 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
|
|