|
|
|
National Stock Number:
5310-00-764-0968
Federal Supply Class:
5310
National Item Identification Number:
007640968
Description:
NUT,SELF-LOCKING,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protusions, slots or splines in or on the periphery or in the face opposite the bearing surface. An integral feature is incorporated for locking on the threads of a mating member. Do not use if a more specific item name applies. Excludes COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; and TURNBUCKLE BODY.
|
Manufacturer Information:
| 82631-235 | 56878 | SPS TECHNOLOGIES, LLC | | BACN10GR35 | 77272 | THE BOEING COMPANY | | BACN10GR35 | 81205 | THE BOEING COMPANY | | BACN10RF235 | 81205 | THE BOEING COMPANY | | SL2822-235 | 97393 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.375 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.125 INCHES NOMINAL | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL NUT | | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE NUT | | NOMINAL THREAD SIZE | 2.988 INCHES | | NUT DIAMETER | 3.579 INCHES MINIMUM AND 3.599 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.305 INCHES MINIMUM AND 0.335 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SPECIAL FEATURES | THREADS SQUARE WITHBEARING SURFACE BY 0.002 IN. | | SPECIFICATION/STANDARD DATA | 81205-BACN10GR MANUFACTURERS STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE NUT | | TEMP RATING | 250.0 FAHRENHEIT NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH DIAMETERS | +2.9474 TO 2.9529 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UNS |
|
|