|
|
|
National Stock Number:
5310-00-763-4092
Federal Supply Class:
5310
National Item Identification Number:
007634092
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8153-31-050C | 70210 | HONEYWELL INTERNATIONAL INC. | | S8153-31-050C | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM | | OVERALL DIAMETER | 0.195 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD 1ST MATERIAL RESPONSE AND MIL-S-7952 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-636 FED SPEC 2ND MATERIAL RESPONSE AND SAE ASSN STD 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1025 OR STEEL OR STEEL COMP 1020 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.050 INCHES NOMINAL |
|
|