|
|
|
National Stock Number:
5310-00-761-5964
Federal Supply Class:
5310
National Item Identification Number:
007615964
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 41A359 | 0UES3 | MID-AMERICA AEROTECH, LLC | | 41A359 | 19156 | MOOG INC | | 41A359 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 41A359 | 94697 | MOOG INC | | 41A359 | 9P5N5 | MOOG MILITARY AIRCRAFT LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | COLD DRAWN 1/4 HARD CONDITION | | HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | OVERALL DIAMETER | 0.545 INCHES MINIMUM AND 0.555 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | WPS-10012,FSCM 79294 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
|
|