|
|
|
National Stock Number:
5310-00-753-9604
Federal Supply Class:
5310
National Item Identification Number:
007539604
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 127079 | 76894 | CELTRAC CORP | | 139702H | 31007 | NAVISTAR INTL CORP | | 139702H | 89346 | NAVISTAR INTL CORP TRUCK BR OHIO PLANT | | 14G92 | 56442 | DIAMOND REO TRUCK CO | | 1861076 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1861076 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1861076 | 24617 | GENERAL MOTORS CORP | | 1861076 | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | 1861076 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 1861076 | 7X677 | GENERAL MOTORS LLC | | 1913959 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1913959 | 1LW55 | BORGWARNER PDS (ANDERSON), L.L.C. | | 1913959 | 24617 | GENERAL MOTORS CORP | | 1913959 | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | 1913959 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 1913959 | 7X677 | GENERAL MOTORS LLC | | 3305 | 17990 | DIVCO TRUCK DIV OF DIVCO-WAYNE CORP | | 817077 | 24617 | GENERAL MOTORS CORP | | 9B8919 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.391 INCHES NOMINAL | | OVERALL DIAMETER | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D709,GR CE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC PHENOLIC OVERALL | | MINIMUM TENSILE STRENGTH | 16000 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.062 INCHES NOMINAL |
|
|