|
|
|
National Stock Number:
5310-00-724-0208
Federal Supply Class:
5310
National Item Identification Number:
007240208
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 112025 | 93835 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.093 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE | | CROSS-SECTIONAL SHAPE | ROUND NUT | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM | | HOLE CONFIGURATION STYLE | CONFIGURATION B | | HOLE TYPE AND QUANTITY | 6 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COMP 4340 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD SIZE | 2.125 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT THREADS | | SURFACE TREATMENT | CADMIUM OVERALL EXCEPT THREADS | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 12 | | THREAD SERIES | UN |
|
|