|
|
|
National Stock Number:
5310-00-721-5762
Federal Supply Class:
5310
National Item Identification Number:
007215762
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121610 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 12-910-00-100 | 78022 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 153-0183-001 | 94756 | THE BOEING COMPANY | | 160242-001 | 81413 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | 310-0740-010 | 13499 | ROCKWELL COLLINS, INC. | | 617100 | 21793 | ASTRONICS TEST SYSTEMS INC | | NAS620-0 | 10060 | NATIONAL STANDARDS ASSOCIATES | | NAS620-0 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | PW026-0 | 08226 | RELIABLE INDUSTRIES INC DBA RELIABLE FASTENER PRODUCTS | | PW026-0 | 13783 | SMALL LOT STAMPING DIV OF VSI CORP PRODUCTS | | REW620-0 | 08226 | RELIABLE INDUSTRIES INC DBA RELIABLE FASTENER PRODUCTS |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.063 INCHES MINIMUM AND 0.073 INCHES MAXIMUM | | OVERALL DIAMETER | 0.094 INCHES MINIMUM AND 0.114 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 2330 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THICKNESS | 0.016 INCHES NOMINAL |
|
|