5305-00-721-5622 SCREW,EXTERNALLY RELIEVED BODY Index 5310-00-721-5627 WASHER,FLAT

National Stock Number:
5310-00-721-5624

Federal Supply Class:
5310

National Item Identification Number:
007215624

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
254-6556644FNC0 TM-A38D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
254-6556644FNCO TM-A38D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
412-4637518-1143689HUNTINGTON INGALLS INC
413-4491197 PIE25685NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIVISION SUBMARINE ANTENNA QUALITY ASSURANCE
413-4491199 PIE25685NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIVISION SUBMARINE ANTENNA QUALITY ASSURANCE
5032918 PIECE 23853711NAVAL SEA SYSTEMS COMMAND
5579455 ITEM 1553711NAVAL SEA SYSTEMS COMMAND
FF-W-9281348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
FF-W-92TYAGR1CLASSG81348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS15795-42180205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-42196906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-421D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
NICU-MS15795-42 1D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.681 INCHES MINIMUM AND 0.718 INCHES MAXIMUM
OVERALL DIAMETER1.743 INCHES MINIMUM AND 1.780 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALNICKEL ALLOY A OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND G CLASS
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us