| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.229 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | STEEL COMP 1010 NUT |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT HEIGHT | 0.229 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT LENGTH | 0.983 INCHES NOMINAL |
| PLATE THICKNESS | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| PLATE WIDTH | 0.381 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-B-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM NUT |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNF |