2920-00-705-9676 PLATE Index 5306-00-705-9685 BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5310-00-705-9682

Federal Supply Class:
5310

National Item Identification Number:
007059682

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
351385S723040FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES
351385S757526FORD MOTOR COMPANY
351385S7S823040FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES
351385S7S857526FORD MOTOR COMPANY
705968219207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
941432212204DAIMLER CHRYSLER


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
FEATURES PROVIDEDCASEHARDENED
HOLE DIAMETER0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
OVERALL DIAMETER0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
MATERIALSTEEL OVERALL
PERIPHERAL SHAPE STYLEROUND
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
THICKNESS0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM


Click here to Register for Free 30-day Trial