|
|
|
National Stock Number:
5310-00-693-9777
Federal Supply Class:
5310
National Item Identification Number:
006939777
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 199081 | 00088 | ROYAL OAK GAGE INC | | 199081 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| DRIVE POINT DEPTH | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 16 | | DRIVE POINT WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM NUT | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6323 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 8740 OVERALL | | NOMINAL THREAD SIZE | 5.000 INCHES | | NUT DIAMETER | 6.050 INCHES MINIMUM AND 6.070 INCHES MAXIMUM | | NUT STYLE | ROUND | | NUT THICKNESS | 0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM | | SMALL END DIAMETER | 5.190 INCHES MINIMUM AND 5.210 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2408 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | TIN OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UN | | THREAD PITCH DIAMETERS | +4.9323 TO 4.9403 INCHES | | THREAD QUANTITY PER INCH | 16 | | UNDERCUT THICKNESS | 0.070 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
|
|