|
|
|
National Stock Number:
5310-00-691-0141
Federal Supply Class:
5310
National Item Identification Number:
006910141
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 211003743 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 4491153PC32 | 25685 | NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIVISION SUBMARINE ANTENNA QUALITY ASSURANCE | | ASC1536308 | Z4779 | ASC PTY LTD | | MS15795-418 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS15795-418 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS15797-418 .53 1X1.062X.095 TH | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | NICU-MS15795-41 8 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.526 INCHES MINIMUM AND 0.546 INCHES MAXIMUM | | OVERALL DIAMETER | 1.055 INCHES MINIMUM AND 1.092 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY A OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM |
|
|