|
|
|
National Stock Number:
5310-00-689-7349
Federal Supply Class:
5310
National Item Identification Number:
006897349
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10594609-7 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 11508439-2 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 204324-2 | 98810 | AEROSONIC LLC | | 355-122-1748 | 99932 | MOOG INC. | | 566A004925 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 752 | 62143 | NORTHERN TELECOM INC TELECOM DISTRIBUTION DIV | | 752-3631-4 | 62143 | NORTHERN TELECOM INC TELECOM DISTRIBUTION DIV | | 7736614P4 | 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS | | 965838-21 | 82577 | RAYTHEON COMPANY | | S8157N171-010 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.133 INCHES MINIMUM AND 0.137 INCHES MAXIMUM | | OVERALL DIAMETER | 0.181 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.008 INCHES MINIMUM AND 0.012 INCHES MAXIMUM |
|
|