| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.248 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 120.0 DEGREES NOMINAL NUT |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.625 INCHES NOMINAL |
| FEATURES PROVIDED | FLOATING NUT |
| LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| LUBRICATION | DRY FILM LUBRICANT |
| MATERIAL | ALUMINUM ALLOY OR STEEL SHELL |
| MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT |
| MATERIAL | STEEL NUT |
| MOUNTING HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| NUT LENGTH | 1.602 INCHES MAXIMUM |
| NUT HEIGHT | 0.630 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 0.115 INCHES MAXIMUM |
| PLATE WIDTH | 0.859 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OR QQ-P-416 TY 2 CL 1 FED SPEC 2ND TREATMENT RESPONSE OR QQ-P-416 TY 2 CL 2 FED SPEC 2ND TREATMENT RESPONSE OR QQ-P-416 TY 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE SHELL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | ANODIZE OR CHROMATE OR CADMIUM SHELL |
| SURFACE TREATMENT | CADMIUM NUT |
| TEMP RATING | 250.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNJF |
| THREAD QUANTITY PER INCH | 20 |