5310-00-685-3299, WASHER,FLAT

National Stock Number:
5310-00-685-3299

Federal Supply Class:
5310

National Item Identification Number:
006853299

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

ES138A125-312T	20418	DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING
ES138A125-312T	98255	DRS SUSTAINMENT SYSTEMS INC

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
OVERALL DIAMETER	0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-561 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-411 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-359 FED SPEC 2ND MATERIAL RESPONSE OR QQ-A-356 FED SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 3003 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OR CHROMATE OVERALL
THICKNESS	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM

Click here to Register for Free 30-day Trial