|
|
|
National Stock Number:
5310-00-685-1450
Federal Supply Class:
5310
National Item Identification Number:
006851450
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 119447-006 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 310-0049-00 | 13499 | ROCKWELL COLLINS, INC. | | 310-0049-00 | 79807 | WROUGHT WASHER MFG., INC. | | 310-0049-000 | 13499 | ROCKWELL COLLINS, INC. | | 310-0049-000 | 79807 | WROUGHT WASHER MFG., INC. | | 310-0049-000 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 77111995 | K0131 | GOODRICH LIMITED | | S8157N121-063 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | S8157N153-064 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM | | OVERALL DIAMETER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.057 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
|
|