|
|
|
National Stock Number:
5310-00-684-2724
Federal Supply Class:
5310
National Item Identification Number:
006842724
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 382008 | 27660 | INSTRUMATICS INC | | 382008 | 30201 | TREGO INC | | 382008 | 32543 | WHITCRAFT LLC | | 382008 | 62224 | SATELLITE AEROSPACE, INCORPORATED | | 382008 | 77445 | RTX CORPORATION | | 382008 | JA269 | TOKYO JUDOI KOGYO K.K. | | 382008 | S0554 | TOKYO JUDOGI KOGYO CO. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | SOFT ANNEALED | | HOLE DIAMETER | 0.443 INCHES MINIMUM AND 0.453 INCHES MAXIMUM | | OVERALL DIAMETER | 0.673 INCHES MINIMUM AND 0.683 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4500 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 101 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2414 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | LEAD OVERALL | | THICKNESS | 0.048 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
|
|