|
|
|
National Stock Number:
5310-00-682-5539
Federal Supply Class:
5310
National Item Identification Number:
006825539
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 106455 | 12603 | CLARK EQUIPMENT CO | | 106455 | 40152 | VME AMERICAS INC SUB OF VME GROUP N V | | 106455 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC | | L33001 | 10988 | CNH INDUSTRIAL AMERICA LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 88.0 ROCKWELL SUPERFICIAL 15-N MINIMUM | | HOLE DIAMETER | 1.006 INCHES MINIMUM AND 1.026 INCHES MAXIMUM | | OVERALL DIAMETER | 2.436 INCHES MINIMUM AND 2.440 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SPECIAL FEATURES | SURFACE A HAS OUTSIDE EDGE CHAMFERED 0.031 INCHES BY 15 DEGREES | | THICKNESS | 0.1903 INCHES MINIMUM AND 0.2043 INCHES MAXIMUM |
|
|