5310-00-680-6745, WASHER,FLAT

National Stock Number:
5310-00-680-6745

Federal Supply Class:
5310

National Item Identification Number:
006806745

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

306-035-0004	95542	NORTHROP GRUMMAN SYSTEMS CORPORATION
5310006806745	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
98019A130	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS15795-811	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS15795-811	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS15795-811M0D	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS15795-811MOD	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
DEPARTURE FROM CITED DESIGNATOR	AS MODIFIED BY THE MATERIAL SPEC
HOLE DIAMETER	0.307 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
OVERALL DIAMETER	0.727 INCHES MINIMUM AND 0.749 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 416 OVERALL
NONDEFINITIVE SPEC/STD DATA	A TYPE AND 1 GRADE AND B CLASS
PERIPHERAL SHAPE STYLE	ROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THICKNESS	0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM

Click here to Register for Free 30-day Trial