|
|
|
National Stock Number:
5310-00-679-4577
Federal Supply Class:
5310
National Item Identification Number:
006794577
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10860119 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | OVERALL DIAMETER | 2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-P-636 FED SPEC 1ST TREATMENT RESPONSE OR TT-E-529 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PRIMER AND PAINT OVERALL | | THICKNESS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
|
|