| DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE WITH METALLIC INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS7245 ASSN STD 2ND MATERIAL RESPONSE LOCKING INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367 FED SPEC 1ST MATERIAL RESPONSE SHELL |
| MATERIAL | ALUMINUM ALLOY 2014 SHELL |
| MATERIAL | STEEL CORROSION RESISTING LOCKING INSERT |
| MOUNTING HOLE ARRANGEMENT STYLE | 3 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT LENGTH | 3.000 INCHES MINIMUM AND 3.120 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| NUT HEIGHT | 2.410 INCHES MINIMUM AND 2.470 INCHES MAXIMUM |
| PLATE THICKNESS | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| PLATE WIDTH | 1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT | OXIDE FILM NUT |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNF |