|
|
|
National Stock Number:
5310-00-663-0528
Federal Supply Class:
5310
National Item Identification Number:
006630528
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 328672 | 06848 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | OVERALL DIAMETER | 0.912 INCHES MINIMUM AND 0.932 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5516 ASSN STD 1ST MATERIAL RESPONSE AND AMS 5504 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 AND STEEL COMP 410 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | OXIDE FILM OVERALL | | THICKNESS | 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM |
|
|